CX 111 is a small coving that adds distinctive character to a room, packing in a lot of shape for a small product. This coving is ideally suited to smaller rooms or confined spaces. Sharp details, easy installation, lightweight, non fragile coving, already primed and easy to paint.
Inspiration and adhesives, see below.
The diminutive 26 x 15mm CX111 coving section is especially suitable to modern homes with a lower ceiling height. The enthusiastic DIY installer will find working with our Duropolymer material very similar to working with soft wood alternatives. The only tools required for installation is a good stiff saw, cartridge gun for the adhesive, a mitre box and a small paint brush. On a small moulding like this one neat bead of adhesive will allow a strong installation to a prepared wall, and if the installation is done in warm conditions finishing may be possible within 6 hours (always test a small area first for peace of mind). Use FDP500 in most rooms, and FDP700 in humid or wet areas such as bathrooms.
The CX111 can be used in very tight spaces such as small rooms, especially upstairs where larger moulding may look clumsy. Where ceiling heights are higher choose the similar CX112 coving profile. Ideal for bedroom coving and bathroom coving. CX111 ceiling coving samples available below.
Install using the correct adhesives.
2.6cm high x 1.5cm deep x 200cm long.
Light weight resilient man-made Orac Decor Duropolymer®.
Technical drawing PDF
Coving installation guide